Project Vapor: Restoring the gas vapor seperator.

Posted by:

|

On:

|

,

This side quest should be pretty straightforward. I will need to figure out how to repair the missing nipple.

My plan is to clean it up really well and repair the missing/broken nipple at the top right. It is crucial to connect to the charcoal canister in the engine bay.

Update: This was pretty simple. I went to Home Depot and bought a fuel filter.

Basically, I took an off-the-shelf fuel filter and some JB Weld to fashion another nipple to connect the line from the vapor separator to the charcoal canister. After cleaning everything, I sprayed it matte black and lightly sanded the separator.

This was pretty simple. Took about 2 hours from start to finish.

Back to Project Driver and Passenger Refurb: Glass refurb part deux.

Next: