I have set out to get the horn working on this bad boy. I quickly realized the cancel cam wiring harness was not appropriate.
As you can see on the left, the harnesses do not match up When you buy the wiring kit from Anything Scout, you will need a short-style harness.
The short will not work with the Light Blue (right blinker) and Black (horn) cable. To get the left blinker working, I had to jump the harness. I think the pin style is smaller.
As you can see, the early model plug is coming off the cluster and is about 1 inch shorter than the late model coming off the cancel cam.
I will need a pinning tool to match the male and female harnesses.
I have never repinned a harness, but it seems to be pretty straightforward. I will need to pop the wires out
White – Green – Yellow – Purple – Brown – Dark Blue – Light Blue – Black
Dark Blue = Right Blinker
Light Blue – Right Blinker (I had to jump the harness due to the fit of the harness)
Black – Ground connect for the horn. (also jumped, see below.)
Update: (10/21/2025)
After some trial and error, I did what I should have done not to start. I jumped the black cable from one side of the harness because of incorrect contacts inside. Although it’s not the most elegant solution, I’ve reached out to Anything Scout, and they don’t have any early model harnesses with the correct pin sizes. Guess what. The horn is now working!
Back:
Next:
Other Sidequest: